Reliable transport for heaviest loads

Heavy duty wheel GB 340x200/75F7-295-921579

The customer

... is located in the south of Sweden. Their engineers have been active in the machine building industry for over 30 years, especially in the press industry, the automotive, aerospace and wind power industries. Core competence is lifting, turning and transport of heavy and geometrically demanding loads. Single transport carts as well as single machines and complete flow production lines are produced.


The challenge

The machine manufacturer produces electric vehicles for the transport of extremely heavy loads up to 500 tons. Some of these vehicles are possible to use as AGVs (automated guided vehicles).

For the steering of his vehicles, the customer has developed a customized wheel which is used as drive wheel inside these vehicles. Depending on the type of transport platform, one to four drive wheels are used. These are designed to carry heavy loads at low speeds (approximately 3–4 km/h). The electrical vehicles are normally operating indoors on an even concrete floor. Important requirements for this application are a compact design and a high load capacity.

For some years, a wheel was used that did not meet the quality requirements. The manufacturing of the wheel was divided into two steps, receiving the parts from two suppliers, one for the wheel centre and one for the Vulkollan® tread. The quality problems led to complaints and high service and replacement costs.

To avoid further costs, the customer required a complete high-quality drive wheel with a load capacity of six tons.


Our solution

The Blickle Besthane® polyurethane tread of the Blickle wheel series GB and the stable, customized wheel centre made of cast iron offers a good stability and a low rolling resistance, so that the electric transport vehicles achieve a longer service life due to the higher efficiency. With a wheel diameter of only 340 mm and a load capacity of 6 tons per wheel, the customized drive wheel easily fits under the flat substructure of the vehicles.


The result

With the Blickle complete solution in higher quality, this customer was able to drastically reduce procurement costs, delivery times and follow-up costs.


Technical information and product advantages GB 340x200/75F7-295-921579

  • High load capacity of 6.000 kg along with compact dimensions
  • Low, energy saving rolling resistance
  • Quality product from only one reliable supplier
  • Reliable delivery times and less administration