VSVU, VSB – wheel series

Basic wheels

The tread in the VSB and VSVU basic wheel series is directly cast onto a steel wheel centre with a hole. This is made from the high-quality polyurethane-elastomer Blickle Besthane® or Vulkollan® with a hardness of 92 Shore A. The tread has a high dynamic load capacity and can be used at speeds up to 16 km/h. It also provides high cut and tear propagation resistance.

The wheel centres of the VSB and VSVU wheel series are easy to machine individually, allowing them to be tailored to specific requirements. The GB or GVU series can be used as a running wheel.

  • VSVU, VSB – Wheels

    Wheels in the VSVU and VSB series are available in sizes 125 to 300 mm and have a hole in the wheel centre.


    Wheel Ø

    [mm]
    Wheel
    width
    [mm]
    Load capacity
    at 4 km/h
    [kg]
    Load capacity
    at 10 km/h
    [kg]
    Load capacity
    at 16 km/h
    [kg]
    Achsloch-Ø

    [mm]
    Hub
    length
    [mm]
    Internal clamping
    surface
    [mm]
    External clamp-
    ing surface
    [mm]
    VSB 127/20H7 125 50 700 490 280 20H7 50 70 90
    VSVU 127/20H7 125 50 700 490 280 20H7 50 70 90
    VSB 150/20H7 150 50 800 560 320 20H7 50 80 100
    VSVU 150/20H7 150 50 800 560 320 20H7 50 80 100
    VSB 160/20H7 160 50 800 560 320 20H7 50 90 110
    VSVU 160/20H7 160 50 800 560 320 20H7 50 90 110
    VSB 200/20H7 200 50 1,000 700 400 20H7 50 110 150
    VSVU 200/20H7 200 50 1,000 700 400 20H7 50 110 150
    VSB 202/20H7 200 80 1,600 1,150 640 20H7 80 110 150
    VSVU 202/20H7 200 80 1,600 1,150 640 20H7 80 110 150
    VSB 251/25H7 250 50 1,250 870 500 25H7 50 150 190
    VSVU 251/25H7 250 50 1,250 870 500 25H7 50 150 190
    VSB 252/25H7 250 80 1,800 1,250 720 25H7 80 150 190
    VSVU 252/25H7 250 80 1,800 1,250 720 25H7 80 150 190
    VSB 302/30H7 300 80 2,400 1,650 960 30H7 80 150 230
    VSVU 302/30H7 300 80 2,400 1,650 960 30H7 80 150 230