VPP – Wheel and castor series

Wheels and castors with standard solid rubber tyres and synthetic rim

The VPP series uses a standard solid rubber tyre which is cast onto a high-quality impact-resistant polypropylene rim. The tyres have a hardness of 80 Shore A and provide a very high level of operational comfort, good floor preservation and low-noise operation. Because it is puncture-proof, this series is also frequently used as a replacement for pneumatic tyres. They are resistant to a wide range of aggressive substances and are therefore frequently used outdoors. They are also used for waste containers in hospitals, hygiene applications, cleaning equipment  and compressors.

  • VPP – Wheels

    The wheels in the VPP series come in sizes ranging between 80 and 400 mm in diameter. Customers can choose between a ball bearing, roller bearing or plain bore. The wheel series is also available with a non-marking grey tyre.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Axle bore Ø

    [mm]    		 Hub
    length
    [mm]
    VPP 80/12G 80 25 50 plain bore 12 35 To the product
    VPP 80/12R 80 25 50 roller bearing 12 35 To the product
    VPP 100/12G 100 30 70 plain bore 12 45 To the product
    VPP 100/15G 100 30 70 plain bore 15 45 To the product
    VPP 100/12R 100 30 70 roller bearing 12 45 To the product
    VPP 100/15R 100 30 70 roller bearing 15 45 To the product
    VPP 125/12G 125 37.5 100 plain bore 12 45 To the product
    VPP 125/15G 125 37.5 100 plain bore 15 45 To the product
    VPP 125/12R 125 37.5 100 roller bearing 12 45 To the product
    VPP 125/15R 125 37.5 100 roller bearing 15 45 To the product
    VPP 140/15G 140 37.5 115 plain bore 15 45 To the product
    VPP 140/15R 140 37.5 115 roller bearing 15 45 To the product
    VPP 150/20G 150 40 135 plain bore 20 60 To the product
    VPP 150/20R 150 40 135 roller bearing 20 60 To the product
    VPP 160/20-45G 160 40 135 plain bore 20 45 To the product
    VPP 160/20G 160 40 135 plain bore 20 60 To the product
    VPP 160/20-45R 160 40 135 roller bearing 20 45 To the product
    VPP 160/20R 160 40 135 roller bearing 20 60 To the product
    VPP 180/20G 180 50 170 plain bore 20 60 To the product
    VPP 180/20R 180 50 170 roller bearing 20 60 To the product
    VPP 200/20G 200 50 205 plain bore 20 60 To the product
    VPP 200/25G 200 50 205 plain bore 25 60 To the product
    VPP 200/20R 200 50 205 roller bearing 20 60 To the product
    VPP 200/20K 200 50 205 ball bearing 20 60 To the product
    VPP 205/20G 200 65 200 plain bore 20 60 To the product
    VPP 250/20-74G 250 60 295 plain bore 20 74 To the product
    VPP 250/20G 250 60 295 plain bore 20 65 To the product
    VPP 250/25-74G 250 60 295 plain bore 25 74 To the product
    VPP 250/25G 250 60 295 plain bore 25 65 To the product
    VPP 250/25R 250 60 295 roller bearing 25 65 To the product
    VPP 250/20K 250 60 295 ball bearing 20 65 To the product
    VPP 250/25K 250 60 295 ball bearing 25 65 To the product
    VPP 254/25G 250 75 300 plain bore 25 65 To the product
    VPP 256/20G 250 85 250 plain bore 20 75 To the product
    VPP 256/20R 250 85 250 roller bearing 20 75 To the product
    VPP 300/25G 300 60 250 plain bore 25 60 To the product
    VPP 355/25R 350 75 300 roller bearing 25 75 To the product
    VPP 400/25G 400 100 350 plain bore 25 75 To the product
    VPP 400/25R 400 100 350 roller bearing 25 75 To the product
    To the product finder
  • VPP – Swivel castors with plate

    As standard, the VPP series is available with various bracket series with a top plate fitting. These vary in terms of their design depending on the application conditions or the required load capacity:

    L series: Pressed steel swivel bracket with top plate fitting, medium duty design

    The guide provides a detailed comparison of the bracket series which are available. Suitable brake systems for each base product are provided in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LE-VPP 80G 80 25 50 plain bore 102 100 x 85 80 x 60 9 38 To the product
    L-VPP 80G 80 25 50 plain bore 102 100 x 85 80 x 60 9 38 To the product
    LE-VPP 80R 80 25 50 roller bearing 102 100 x 85 80 x 60 9 38 To the product
    L-VPP 80R 80 25 50 roller bearing 102 100 x 85 80 x 60 9 38 To the product
    LE-VPP 100G 100 30 70 plain bore 125 100 x 85 80 x 60 9 36 To the product
    L-VPP 100G 100 30 70 plain bore 125 100 x 85 80 x 60 9 36 To the product
    LE-VPP 100R 100 30 70 roller bearing 125 100 x 85 80 x 60 9 36 To the product
    L-VPP 100R 100 30 70 roller bearing 125 100 x 85 80 x 60 9 36 To the product
    LE-VPP 125G 125 37.5 100 plain bore 150 100 x 85 80 x 60 9 38 To the product
    L-VPP 125G 125 37.5 100 plain bore 150 100 x 85 80 x 60 9 38 To the product
    LE-VPP 125R 125 37.5 100 roller bearing 150 100 x 85 80 x 60 9 38 To the product
    L-VPP 125R 125 37.5 100 roller bearing 150 100 x 85 80 x 60 9 38 To the product
    L-VPP 140G 140 37.5 115 plain bore 170 140 x 110 105 x 75–80 11 50 To the product
    L-VPP 140R 140 37.5 115 roller bearing 170 140 x 110 105 x 75–80 11 50 To the product
    LE-VPP 150G 150 40 135 plain bore 190 140 x 110 105 x 75–80 11 54 To the product
    LE-VPP 150R 150 40 135 roller bearing 190 140 x 110 105 x 75–80 11 54 To the product
    LE-VPP 160G 160 40 135 plain bore 195 140 x 110 105 x 75–80 11 54 To the product
    L-VPP 160G 160 40 135 plain bore 195 140 x 110 105 x 75–80 11 60 To the product
    LE-VPP 160R 160 40 135 roller bearing 195 140 x 110 105 x 75–80 11 54 To the product
    L-VPP 160R 160 40 135 roller bearing 195 140 x 110 105 x 75–80 11 60 To the product
    LE-VPP 180G 180 50 170 plain bore 215 140 x 110 105 x 75–80 11 50 To the product
    L-VPP 180G 180 50 170 plain bore 215 140 x 110 105 x 75–80 11 60 To the product
    LE-VPP 180R 180 50 170 roller bearing 215 140 x 110 105 x 75–80 11 50 To the product
    L-VPP 180R 180 50 170 roller bearing 215 140 x 110 105 x 75–80 11 60 To the product
    LE-VPP 200G 200 50 205 plain bore 235 140 x 110 105 x 75–80 11 54 To the product
    L-VPP 200G 200 50 205 plain bore 235 140 x 110 105 x 75–80 11 65 To the product
    LE-VPP 200R 200 50 205 roller bearing 235 140 x 110 105 x 75–80 11 54 To the product
    L-VPP 200R 200 50 205 roller bearing 235 140 x 110 105 x 75–80 11 65 To the product
    L-VPP 250G-3 250 60 295 plain bore 295 140 x 110 105 x 75–80 11 77 To the product
    L-VPP 250R-3 250 60 295 roller bearing 295 140 x 110 105 x 75–80 11 77 To the product
    To the product finder
  • VPP – Swivel castors with bolt hole

    As an alternative to a top plate fitting, the VPP series is also available with a bolt hole fitting.

    LER series: Pressed steel swivel bracket with bolt hole

    Refer to the guide for more information about the LER series. The brake system versions available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate Ø

    [mm]    		 Bolt
    hole Ø
    [mm]    		 Offset

    [mm]
    LER-VPP 80G 80 25 50 plain bore 102 70 13 38 To the product
    LER-VPP 80R 80 25 50 roller bearing 102 70 13 38 To the product
    LER-VPP 100G 100 30 70 plain bore 125 70 13 36 To the product
    LER-VPP 100R 100 30 70 roller bearing 125 70 13 36 To the product
    LER-VPP 125G 125 37.5 100 plain bore 150 70 13 38 To the product
    LER-VPP 125R 125 37.5 100 roller bearing 150 70 13 38 To the product
    LER-VPP 150G 150 40 135 plain bore 190 88 13 54 To the product
    LER-VPP 150R 150 40 135 roller bearing 190 88 13 54 To the product
    LER-VPP 160G 160 40 135 plain bore 195 88 13 54 To the product
    LER-VPP 160R 160 40 135 roller bearing 195 88 13 54 To the product
    LER-VPP 180G 180 50 170 plain bore 215 88 13 50 To the product
    LER-VPP 180R 180 50 170 roller bearing 215 88 13 50 To the product
    LER-VPP 200G 200 50 205 plain bore 235 88 13 54 To the product
    LER-VPP 200R 200 50 205 roller bearing 235 88 13 54 To the product
    To the product finder
  • VPP – Swivel castors with stem

    The VPP series is available with a stem fitting as an alternative to a plate and bolt hole fitting.

    LEZ series: Pressed steel swivel bracket with stem

    A detailed description of the LEZ series is available in the guide. The brake systems available for each base product are listed in the relevant section.


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Stem Ø

    [mm]    		 Stem length

    [mm]    		 Offset

    [mm]
    LEZ-VPP 80G 80 25 50 plain bore 102 20 50 38 To the product
    LEZ-VPP 100G 100 30 70 plain bore 125 20 50 36 To the product
    LEZ-VPP 125G 125 37.5 100 plain bore 150 20 50 38 To the product
    LEZ-VPP 150G-22 150 40 135 plain bore 190 22 60 54 To the product
    LEZ-VPP 150G-27 150 40 135 plain bore 190 27 60 54 To the product
    LEZ-VPP 160G-22 160 40 135 plain bore 195 22 60 54 To the product
    LEZ-VPP 160G-27 160 40 135 plain bore 195 27 60 54 To the product
    LEZ-VPP 200G-22 200 50 205 plain bore 235 22 60 54 To the product
    LEZ-VPP 200G-27 200 50 205 plain bore 235 27 60 54 To the product
    To the product finder
  • VPP – Fixed castors

    Blickle also provides suitable castors with fixed brackets for all of the swivel castor series.

    B series: Pressed steel fixed bracket with top plate fitting, medium duty design
    BH series: Pressed steel fixed bracket with top plate fitting, heavy duty design

    Detailed information about our fixed brackets is available in the guide. 


    		 Wheel Ø

    [mm]    		 Wheel
    width
    [mm]    		 Load capacity
    at 4 km/h
    [kg]    		 Bearing type


    		 Total height

    [mm]    		 Plate
    dimensions
    [mm]    		 Bolt hole
    spacing
    [mm]    		 Bolt
    hole Ø
    [mm]
    B-VPP 80G 80 25 50 plain bore 102 100 x 85 80 x 60 9 To the product
    B-VPP 80R 80 25 50 roller bearing 102 100 x 85 80 x 60 9 To the product
    B-VPP 100G 100 30 70 plain bore 125 100 x 85 80 x 60 9 To the product
    B-VPP 100R 100 30 70 roller bearing 125 100 x 85 80 x 60 9 To the product
    B-VPP 125G 125 37.5 100 plain bore 150 100 x 85 80 x 60 9 To the product
    B-VPP 125R 125 37.5 100 roller bearing 150 100 x 85 80 x 60 9 To the product
    B-VPP 140G 140 37.5 115 plain bore 170 140 x 110 105 x 75–80 11 To the product
    B-VPP 140R 140 37.5 115 roller bearing 170 140 x 110 105 x 75–80 11 To the product
    B-VPP 150G 150 40 135 plain bore 190 140 x 110 105 x 75–80 11 To the product
    B-VPP 150R 150 40 135 roller bearing 190 140 x 110 105 x 75–80 11 To the product
    B-VPP 160G 160 40 135 plain bore 195 140 x 110 105 x 75–80 11 To the product
    B-VPP 160R 160 40 135 roller bearing 195 140 x 110 105 x 75–80 11 To the product
    B-VPP 180G 180 50 170 plain bore 215 140 x 110 105 x 75–80 11 To the product
    B-VPP 180R 180 50 170 roller bearing 215 140 x 110 105 x 75–80 11 To the product
    B-VPP 200G 200 50 205 plain bore 235 140 x 110 105 x 75–80 11 To the product
    B-VPP 200R 200 50 205 roller bearing 235 140 x 110 105 x 75–80 11 To the product
    BH-VPP 250G 250 60 295 plain bore 295 140 x 110 105 x 75–80 11 To the product
    BH-VPP 250R 250 60 295 roller bearing 295 140 x 110 105 x 75–80 11 To the product
    To the product finder